Pentens UV Resistant PU Waterproofing Coating T-200H

TECHNICAL DATA

Brand : Pentens
Size: 4.5 kg, 20 kg
Colour:  White, Grey
Resin: Modified Polyurethane and Acrylic
Density: 1.10
Solid content: > 55 % by weight
Elongation: > 515%
Tensile Strength (ASTM C412): > 40 kgf/cm2
Tear Strength (ASTM D624 ): > 15 kgf/cm2
Solar reflectance (JIS R 3106): 86.9 %
Solar Absorptance (JIS R 3106): 13.1%
Aging test at 80oC, 168 Hrs (ASTM D573-04 ): 
a. Tensile strength: > 50 kgf/cm2
b. Elongation: > 450%
c. Tear strength: > 15 kgf/cm2
Water Vapor Transmission ASTM E96 Method B: <5 Perms
Curing Time: 12 hours
Application Temperature: 5C to 40C
Service Temperature: 0C to 80C
Self life: At least 1 year when unopened and damaged
Storage condition: Store in a dry cool place

SCOPE OF DELIVERY

• 1 x Pentens UV Resistant PU Waterproofing Coating T-200H

Category:
Other Paint
Tags:
Pentens Paint , Pentens Malaysia , Pentens Johor Bahru , Pentens T-200H , Pentens UV Resistant PU Waterproofing Coating , Pentens UV Resistant PU Waterproofing Coating T-200H
RM 80.00 - RM 270.00
Availability: In Stock
SELECT QTY:
− +
ESTIMATED DELIVERY DATE:
12/07/2025 - 17/07/2025
SHARE

Pentens UV Resistant PU Waterproofing Coating T-200H

Pentens UV Resistant PU Waterproofing Coating T-200H

Discover PENTENS T-200H, a water-based polyurethane and acrylic coating that significantly reduces solar heat absorption and keeps your building cool—ideal for air-conditioned and non-air-conditioned spaces.

Application 

1. Substrate should be primed with a 1:3 mixure of PENTENS T-007 and water. Brush on at the approximate rate of 0.3kg/m2 .
2. On areas exposed hot drying winds. 2-3 thin coats of paint may be more successful than 1 thick coat.
3. PENTENS T-200H is suggested to apply at least 2 coats. The first coat should be applied in one direction only. If possible the second coat should be applied at right angles to the first
4. Leave to cure for approximately 2 to 8 hours before applying second coat. PENTENS T-200H can be installed with conventional airless spray equipment, brush or roller.
 

Important Notes

1. Minimum ambient and substrate temperature is 5C.
2. Never apply more than 1 kg/m2 of PENTENS T-200H in one single layer.
3. Apply only to clean, sound substrates where surfaces should be well dampened but free of surface water and leaks.
4. Thoroughly agitate contents before use.

Super Administrator 28/02/2019

Best this product

Write a review

Note:HTML is not translated!
Rating Bad           Good
Continue
Weight
0.2 kg

Related Products